KS1000 FF Trapezoidni krovni panel

Primjena

A1 vatrootpornost

Primjena

KS1000 FF je trapezoidni krovni panel ispune kamenom vunom. Primjena je moguća na svim vrstama krovova gdje je nagib krova 5° (8,5 %) i više.
KS1000 FF ima najviši stupanj vatrootpornosti - A1 certifikat.

Dužine panela

Standardne dužine panela su od 2m do 13,5 m. Isporučujemo panele i u svim ostalim dužinama.



 

 

Sendvič paneli, Krovni paneli KS1000 FF


Izbor karakteristika proizvoda

Sendvič paneli, Krovni paneli KS1000 FF


d– Debljina ispune (mm) 100 120 150
D– Ukupna dimenzija (mm) 130 150 180
Težina (kg/m2) obloga 0.6/0.5 mm 23.85 26.45 30.35

Materials

MATERIALS - STEEL

Galvanic protection options

  1. Hot-dip zinc coated steel with a total of 275g/m2 of zinc, according to EN 10147:2000. This can be finished with a number of coating - polyester, PVDF, Plastisol and Foodsafe finishes.
  2. Galvatite coated steel in accordance with EN 10147, for Celestia finishes.
  3. Galvalloy (hot-dip coated with eutectic alloy of approx. 95% Zn, 5% Al and other elements) in accordance with EN 10214 for coated steel HPS200..

Substrate thicknesses

  • Standard external sheet thickness 0.50 mm.
  • Standard internal sheet thickness 0.40 mm.
  • Other thicknesses are available by arrangement with Kingspan.

External Coating Options

1. Standard Polyester – PES

Polyester is a universal, economic coating system suitable for exterior and interior applications. The nominal coating thickness is 25 µm.

2. PVDF

PVDF offers unequalled colour and gloss retention and good corrosion resistance. The nominal coating thickness is 25 µm. It can be used in climates with extremely high UV radiation combined with extreme temperatures and relative humidity. The standard colour range includes metallic silver.

3. HPS200 (by Corus)

HPS200 is a premium architectural coating system, tested in the laboratory and on site in severe climates, for use worldwide. Its tough, 200 µm (nominal thickness) coating has the unique Scintilla finish and is available in bright or subtle hues, providing architects with an extensive palette of colours.

4. Plastisol 200 µm

Plastisol is a high performance coating system with a grain finish and a nominal thickness of 200 µm. Typical properties of Plastisol are excellent abrasion, high corrosion resistance, excellent flexibility and therefore very good scratch resistance.

5. Celestia (by Corus)

Celestia is a metallic-finish cladding steel with a 120 µm (nominal thickness) high performance Plastisol coating. The standard product has a high performance polyester coating on the reverse side. The metallic finish captures light and movement, giving depth and life to the cladding surfaces.

Internal Coating Options

1. Polyester

Polyester coating with a nominal thickness of 15 µm. The standard colour is grey white, (similar RAL 9002).

2. Lining enamel

Lining enamel with a nominal thickness of 22 µm with a white finish.

3. Foodsafe

The surface of this 150 µm thick polymer coating is non-toxic and resistant to mould, durable and easy to clean. It is chemically inert and safe for continuous contact with unpacked food. The standard colour is white. Consult Kingspan about the availability of other colours.
Other coating systems are available by discussion with Kingspan.


INSULATION CORE

Mineral fiber of a high specific weight, suitable for applications that require fire resistance of more than 45 minutes.


 

 

 

MATERIALS - ALUMINIUM

Plain and coloured aluminium is available on a project specific basis. Contact Kingspan Technical Services.

Seals and Fillers

Side lap

All external side laps to be weather sealed along the full length by an unbroken bead of PVC self –adhesive sealant tape (factory applied) or Butyl sealing tape (site applied).
Vapour seal only if it is required .


End Lap

All external end laps (overlaps) to be sealed along full width using PU self-adhesive sealant tape- 20x4-(20 mm expanded) and Butyl self-adhesive sealant tape – 10 x 3 mm (see construction details)


Profiled Fillers

Where flashing are fixed across the profile of the insulated panel, PE profiled sealing fillers („A“ inside,“B“ outside ) should be used to seal and close profile.
Seal the top end,bottom and sides of each profiled filler with gun –grade sealant.


Junctions

Junctions between the roof panel system and walls /penetrations and all gaps filled with MW fibre.
Internal face of panel to be air sealed along the full length by PE self- adhesive sealant tape
9 x 3 mm.
Self-adhesive sealant tape PE 20x5mm to be continously applied between panel and steel support only at ridge/eaves/end lap locatoins where the internal junction reguires sealing.


Perfomance

Thermal Insulation

Panel Thickness

U value (W/m2K)

(mm)

HCFC Free = 0.040

100

0.414

120

0.348

150

0.281


Biological

Kingspan insulated sandwich panels are immune to attack from mould, fungi, mildew and vermin. No urea formaldehyde is used in the construction, and the panels are non-deleterious.

Fire

KS1000 FF insulated sandwich panels have been tested and approved and comply with National Building Regulations and standards.

Panel Thickness (mm) Fire rating
100/134  
120/154  
150/184  

Acoustics

Measurement of the sound insulation index of panel KS1000 FF is being prepared.

Packing and Delivery

Packing

Standard packing – road transportation

KS1000 FF panels are stacked weather side to weather side (to minimise palette height). The top, bottom, sides and ends are protected with foam and timber packing and the entire palette is wraped in plastic.
The number of panels in each pack depends on panel thickness and length. The table below is shown as a guide. Quantities are reduced for exceptionally long panels. Typical palette height is 1,100 mm.
Maximum palette weight is 2,500 kg.


Panel core thickness (mm) 100 120 150
Number of panels in package 8 7 6


Delivery

All deliveries (unless indicated otherwise) are by road transport to project site. Off loading is the responsibility of the client.

Structural Tables

Currently, there are static tests being carried out in the state laboratory, on which new static tables will be prepared. For detailed information please contact Kingspan.

Site Instalation

Roof Panels

Installation Procedure KS1000 FF

These panels lap at the sides and ends, so they must be fixed in sequence to ensure reliable performance.


1. Start with the eaves (or bottom) corner panel, with the projecting side and end laps to the outside of the building. Install fasteners and apply sealant as specified.


Sendvič paneli, Krovni paneli KS1000 FF


2. Locate the second panel upslope or above, so that it overlaps the first, adjusting its position carefully before contacting the sealant. Repeat up to the ridge or eaves/gable.


Sendvič paneli, Krovni paneli KS1000 FF


3. Start the second tier from the eaves (or bottom), side lapping the first panel, sealing and fixing, as specified. Repeat the procedure for the complete roof.


Sendvič paneli, Krovni paneli KS1000 FF


Quality/Waranties

Quality

Kingspan insulated sandwich panels are manufactured from the highest quality materials, using state of the art production equipment to rigorous quality control standards, complying with ISO9001:2000 standards, ensuring long term reliability and service life.

Building Regulations

Kingspan KS1000 RW insulated sandwich panels conform to the National Building Regulations and standards.

Guarantees & Warranties

Kingspan will provide external coating and product guarantees on a project by project basis.

Certification Reference

Fastener Selector

FASTENER SELECTOR GUIDE

Fastener Selection – SFS intec

Product: STEEL – KS1000 FF Roof System, Fixing position: CROWN (19 or 16 mm diameter sealing washer)

Sendvič paneli, Krovni paneli KS1000 FF
Sendvič paneli, Krovni paneli KS1000 FF
* Fasteners without “dual” thread + saddle washers. The screw must be provided with a suitable storm washer.


Product: CONCRETE – KS1000 FF Roof System, Fixing position: CROWN (19 mm diameter sealing washer)

Sendvič paneli, Krovni paneli KS1000 FF
* Fasteners without “dual” thread + saddle washers


Product: TIMBER – KS1000 FF Roof System, Fixing position: CROWN (19 mm diameter sealing washer)

Sendvič paneli, Krovni paneli KS1000 FF
* Fasteners without “dual” thread + saddle washers


Fastener Selection – EJOT

Product: STEEL – KS1000 FF Roof System, Fixing position: CROWN (16 mm diameter sealing washer and storm washer 26/27)

Sendvič paneli, Krovni paneli KS1000 FF
Sendvič paneli, Krovni paneli KS1000 FF
* Fasteners without “dual” thread + saddle washers. The screw must be provided with a suitable storm washer.


Product: CONCRETE – KS1000 FF Roof System, Fixing position: CROWN (16 mm diameter sealing washer and storm washer 26/27)

Sendvič paneli, Krovni paneli KS1000 FF
* All fasteners must be used with the correct sealing washer.

Product: TIMBER – KS1000 FF Roof System, Fixing position: CROWN (16 mm diameter sealing washer and storm washer 26/27)

Sendvič paneli, Krovni paneli KS1000 FF
* Fasteners without “dual” thread + saddle washers. The screw must be provided with a suitable storm washer.

 

Detalji konstrukcije

Recommended Fastener Locations
Side End Lap Detail
Ridge Gable Detail
Mono Ridge Parapet Detail
Gable Wall Parapet
Eaves Detail
Roof to Wall Junction
Roof to Brickwork Junction
Expansion Joint
Roof Penetration Extraction Flue
Roof Pipe Extractor Flue
Roof / Skylights
Change in Roof Slope Detail

Zatražite dodatne informacije !

Kingspan d.o.o.
Jevrejska bb, Lamela III/II
78000 Banjaluka BiH
Tel.: +387 51 226 190
+387 65 716 921
fax. 387 51 226 191
info@kingspan.ba